If you’re a mechanical engineer looking to work in Australia, then you’ll need to prepare a Competency Demonstration Report (CDR) to demonstrate your skills and qualifications. A CDR is a report that provides evidence of your engineering competency and is required by Engineers Australia as part of the skilled migration process. In this article, we’ll guide you through the steps to prepare a CDR report for a mechanical engineer.
Understanding the CDR Report
Before starting, it’s essential to understand the structure of a CDR report. A CDR report consists of three main sections:
- Continuing Professional Development (CPD) list
- Career Episodes
- Summary Statement
CPD List
The CPD list is a list of all the engineering activities you have undertaken, such as courses, seminars, conferences, workshops, and any other professional development activities. You must include at least three activities in the last 12 months and ten activities in the last three years. It’s essential to ensure that all the activities you mention are relevant to the engineering field and highlight the skills and knowledge you have acquired.
ANZSCO 233512- Mechanical Engineer
Mechanical engineers ANZSCO 233512 plan the assembly of different systems required for the commissioning of mechanical process plants. A mechanical engineer designs and supervises the assembly, erection, operation, and maintenance of mechanical and process plants and installations. It is possible that registration or licensing will be required.
Career Episodes
The Career Episodes section is the most critical part of the CDR report, as it highlights your skills and achievements as an engineer. The Career Episodes section should have the following components:
Introduction
The introduction should provide a brief overview of the project or work you are going to discuss in the Career Episode. It should also provide the reader with a context of your work, such as the organization you worked for, the project objectives, and the duration of the project.
Background
The background section should provide more detail about the project, such as the scope of work, the project location, and any relevant information about the organization.
Personal Engineering Activity
This section should describe your specific role in the project and the engineering tasks you performed. It’s essential to describe the technical details of your work and highlight your problem-solving skills and engineering expertise.
Summary
The summary section should summarize the key points of your Career Episode and highlight your achievements and contributions to the project.
Summary Statement
The Summary Statement is a summary of your engineering competencies and how they relate to the Australian Engineering Competency Standards (ECS). The Summary Statement should be based on the evidence you provide in the CPD list and the Career Episodes.
Mechanical Engineers are responsible for the following tasks:
- Mechanical engineers determine the function and responsibility of workers by reviewing functional statements, organizational charts and project information to identify areas of duplication.
- Mechanical engineers establish work measurement programs and analyse work samples to develop standards for labour utilization.
- Mechanical engineers analyse workforce utilisation, operational data and production schedules to determine optimum worker efficiencies.
- To determine optimum equipment efficiencies mechanical engineers analyse facility layout, operational data and production cost.
- Mechanical equipment is designed by mechanical engineers used for the construction of plats and systems.
- Mechanical engineers design components of machines and manufacturing products for the construction of plants and systems.
- Mechanical engineers develop specifications for the manufacture and determining materials, equipment, piping, material flows, capacities and layout of plant construction and systems.
- Mechanical engineers establish standards and policies based on engineering principles and safety regulations for installation, modification, quality control, testing and maintenance of industrial plants and systems.
- To maintain optimum performance mechanical engineers, carry out regular inspections.
- Mechanical engineers direct the maintenance and coordinate requirements for new designs, surveys and maintenance schedules.
Mechanical Engineers are responsible for the following tasks:
- Mechanical engineers determine the function and responsibility of workers by reviewing functional statements, organizational charts and project information to identify areas of duplication.
- Mechanical engineers establish work measurement programs and analyse work samples to develop standards for labour utilization.
- Mechanical engineers analyse workforce utilisation, operational data and production schedules to determine optimum worker efficiencies.
- To determine optimum equipment efficiencies mechanical engineers analyse facility layout, operational data and production cost.
- Mechanical equipment is designed by mechanical engineers used for the construction of plats and systems.
- Mechanical engineers design components of machines and manufacturing products for the construction of plants and systems.
- Mechanical engineers develop specifications for the manufacture and determining materials, equipment, piping, material flows, capacities and layout of plant construction and systems.
- Mechanical engineers establish standards and policies based on engineering principles and safety regulations for installation, modification, quality control, testing and maintenance of industrial plants and systems.
- To maintain optimum performance mechanical engineers, carry out regular inspections.
- Mechanical engineers direct the maintenance and coordinate requirements for new designs, surveys and maintenance schedules.
On the Occupation List of Mechanical Engineers:
- 489 (S/T) Occupations List
- 482 TSS Visa Medium Term List
- 407 Training visa occupations List
- 482 TSS Visa Regional Occupation List
- 189 Skilled Independent and Family Sponsored 489 Occupations List and 485 Graduate Work Stream
- 190 State/Territory Sponsored
- 186 ENS Visa Occupations List
- 187 RSMS Visa Occupations List
- 491 – Skilled Work Regional (provisional) visa (subclass 491) Occupation List
- 494 – Skilled Employer-Sponsored Regional (provisional) (subclass 494) – Employer-sponsored stream
Exceptions for Unit Group 2335:
- Australian Graduate exceptions apply in some states/territories.
- Priority Skilled Lists may apply a specific requirement in some states.
- Countries free from submitting IELTS or OET include the UK, Canada, New Zealand, the US, and Ireland. Where mandatory licensing or registration is required, you must demonstrate a level of English sufficient to meet licensing/registration or a minimum IELTS, or equivalent, whichever is higher.
Occupations in this 2335 Unit Group:
- 233511 Industrial Engineer.
- 233512 Mechanical Engineer.
- 233513 Production or Plant Engineer.
Language proficiency to be eligible for Mechanical Engineer:
- IELTS result with a minimum score of 6 (L, R, W), 7 in speaking and 7 overall;
- OET result with a minimum grade B in all sections;
- TOEFL iBT with a minimum score (L:12 R:13 W:21 S:23 overall L93);
- PTE Academic with a min score of 50 (L, R, W), 65 in speaking, and 65 overall.
Unit Group 2335: Industrial, Mechanical and Production Engineers:
Industrial, Mechanical, and Production Engineers are involved in the construction, operation, logistics, and maintenance of mechanical and process plants. Industrial, Mechanical, and Production Engineers ensure the usage of resources is cost-effective. Industrial, Mechanical, and Production Engineer installs and establishes programs to coordinate manufacturing activities. Registration or licensing may be required.
Skill Level required for Mechanical Engineer:
Most occupations in this unit group have a skill level commensurate with a bachelor’s degree or higher qualification. At least five years of relevant experience and/or relevant vendor certification may substitute for the formal qualification. In some instances, relevant experience and/or on-the-job training may be required in addition to the formal qualification (ANZSCO Skill Level 1).
Writing Tips for CDR Report
Now that you understand the structure of a CDR report let’s dive into some tips for writing a successful CDR report.
Use CDR Report Sample for Mechanical Engineer
CDR Report Sample for Mechanical Engineer covers all of the required reports, including All Three Career Episodes Report, Continuing Professional Development (CPD) Report, a Summary Statement Report, and a Curriculum Vitae Report.
Be Specific
It’s essential to be specific when writing your CDR report. Provide detailed information about the engineering tasks you performed and the results you achieved. Use specific examples to demonstrate your problem-solving skills and your contribution to the project.
Use Active Voice
Use the active voice when writing your CDR report. Using the active voice makes your writing more concise and easier to read.
Use Technical Language
Use technical language when writing your CDR report. It’s essential to demonstrate your engineering knowledge and expertise by using the appropriate technical language.
Proofread Your Report
Proofread your report carefully to ensure that there are no grammatical errors or spelling mistakes. A well-written and error-free report demonstrates your attention to detail and professionalism.
Conclusion
In conclusion, preparing a CDR report for a mechanical engineer is a critical step towards working in Australia. A well-written and well-structured CDR report demonstrates your engineering skills and competencies to Engineers Australia. By following the tips outlined in this article, you can write a successful CDR report that highlights your engineering expertise and achievements.
FAQs
- Can I include projects from my previous job in my Career Episodes? Yes, you can include projects from your previous job in your Career Episodes. It’s essential to provide relevant and detailed information about the project and your role in it.
- How many Career Episodes do I need to include in my CDR report? You need to include three Career Episodes in your CDR report. Each Career Episode should highlight your engineering skills and competencies in a different project.
- How long should each Career Episode be? Each Career Episode should be between 1,000 to 2,500 words in length.
- Can I include non-engineering activities in my CPD list? No, you should only include engineering activities in your CPD list. It’s essential to demonstrate your engineering knowledge and skills.
- How long should my Summary Statement be? Your Summary Statement should be between 1,000 to 2,500 words in length. It should summarize your engineering competencies and how they relate to the Australian Engineering Competency Standards (ECS).
